Understanding Alucobond Panels and Their Uses
Alucobond Quantities is an Aluminum Composite Panel (ACP) used extensively for façades, roofing, partitions, and interior cladding. It is lightweight, durable, and resistant to corrosion, UV rays, and weather changes, making it suitable for both Nairobi’s urban climate and Kenya’s coastal regions like Mombasa.
ACP panels come in standard thicknesses of 3–6 mm and standard panel sizes such as 1220 x 2440 mm or 1220 x 3050 mm. Using certified panels ensures compliance with KEBS standards (KS 02-17) and the National Building Code 2024, maintaining structural safety and long-term durability.
For a full range of ACP options, see Alucobond Sheets product page and Alucobond catalog.
Measure the Surface Area of Alucobond Quantities
The first step in calculating Alucobond quantities is to measure the total surface area to be covered. Measure the height and width of walls, partitions, or roof sections in meters. Multiply height by width to determine the area in square meters (m²).
For irregular surfaces or areas with windows and doors, subtract the area of openings to avoid overestimation. Accurate measurements are critical to minimize material waste and additional costs.
Determine Panel Size and Coverage
Standard Alucobond panels cover approximately 2.976 m² per sheet (1220 x 2440 mm). Larger panels, such as 1220 x 3050 mm, cover about 3.721 m² per sheet.
To calculate the number of panels:
Always round up to account for cutting losses, overlaps, or mistakes during installation.
For panel specifications and sizes, visit BHD Alucobond Sheets product page.
Factor in Wastage and Overlaps
Construction projects typically include 5–10% extra material to account for:
-
Cutting for corners, edges, and trims
-
Misalignment or accidental damage
-
Panel overlaps at joints
For example, if your calculation yields 50 panels, adding 10% extra means ordering 55 panels.
Plan for Panel Orientation and Joint Spacing
Alucobond panels can be installed vertically or horizontally. The orientation affects:
-
The number of cuts required
-
Joint placement and overlap
-
Aesthetic design patterns
Check installation guides to plan spacing and alignment, ensuring panels fit correctly and minimize waste.
For technical guidance, see BHD ACP planning resources.
Calculate Material for Multiple Surfaces
For multi-surface projects (e.g., exterior walls, interior partitions, soffits), calculate each section separately:
-
Measure each surface area
-
Determine panel coverage
-
Add 5–10% for wastage
-
Sum the total panels required
This approach ensures precise procurement and reduces unnecessary costs.
Consider Regional Delivery and Logistics
BHD Kenya offers same-day delivery within Nairobi and next-day delivery to other major cities such as Kisumu, Mombasa, Nakuru, Eldoret, Thika, Meru, Kitengela, and Malindi.
Planning quantities alongside delivery schedules ensures uninterrupted site work and timely installation.
Learn more about BHD’s delivery and support at Contact BHD Kenya.
Use a Sample Calculation
Example: Covering a wall of 10 m height × 20 m width with 1220 x 2440 mm panels:
-
Surface Area: 10 × 20 = 200 m²
-
Panel Coverage: 2.976 m² per panel
-
Raw Panels Required: 200 ÷ 2.976 ≈ 67.2 → 68 panels
-
Add 10% Wastage: 68 × 1.1 ≈ 75 panels
Order 75 panels to fully cover the surface with allowance for cutting and overlaps.
Additional Tips for Accurate Estimation
-
Keep a record of all measurements on-site for verification.
-
Consider panel thickness and load specifications if using FR fire-rated panels.
-
Review installation guides to ensure proper cutting, joint spacing, and orientation.
-
For large-scale projects, consider bulk ordering to reduce cost and ensure uniform color.
For a range of panel types and sizes, see BHD Alucobond catalog.
Summary
Accurate calculation of Alucobond quantities is essential for efficient procurement, cost control, and timely project completion in Kenya. By measuring surfaces, considering panel size and orientation, factoring in wastage, and planning logistics with a trusted supplier like BHD Kenya, contractors and developers can minimize waste and ensure smooth installation of ACP panels.
Call to Action
Contact Burhani Hardware Dealers (BHD)
Email: burhanihardwaredealers [at] yahoo.com
Call/WhatsApp: +254 731 217 462 | +254 704 606 131
Visit: BHD, Industrial Area, Funzi Road, Nairobi
Website: https://bhd.co.ke/
Delivery Guarantee:
Same-day delivery within Nairobi.
Next-day delivery countrywide to Nakuru, Kisumu, Mombasa, Eldoret, Thika, Meru, Kitengela, Malindi.
Leave a reply