Premium Polycarbonate Roofing Sheets Kenya & Architectural Solutions
BHD Kenya
PAYBILL 516600 AC 535251 DTB BANK
DTB BANK
Burhani Hardware Dealers (BHD Kenya) - steel, polycarbonates, Perspex and Alucobond since 1982
PAYBILL 516600 AC 535251 DTB BANK
DTB BANK
Fabrication & installation

Steel Fabrication and Installation

BHD fabricates and installs steel structures using sections from its own stock: canopies, frames, trusses, mezzanines, gates and supports.

Burhani Hardware Dealers · Industrial Area, Nairobi · since 1982

Steel Fabrication and Installation by BHD Kenya

Quick answer

BHD fabricates and installs steel structures in Kenya: canopies, roof trusses, frames for cladding and roofing, gates, railings and supports. The steel comes from BHD's own Nairobi stock of hollow sections, beams, channels, angles and plates, and BHD has traded from Industrial Area, Nairobi since 1982.

Fabrication & installation

What we fabricate

Canopies and car-park shades

Steel canopy frames ready for polycarbonate roofing or Alucobond fascia cladding.

Roof trusses and frames

Trusses, purlin layouts and frames for roofing sheets, skylights and cladding.

Structural supports

Beams, columns, brackets and platforms built from HR beams, channels and hollow sections.

Gates, railings and grills

Gates, balustrades, handrails and window grills from hollow sections, flat bar and angle.

How it works

From enquiry to handover

  1. 1

    Send drawings or the idea

    Share drawings, sketches or photos with the main dimensions on WhatsApp.

  2. 2

    Section selection and quote

    BHD proposes the steel sections and finish for the job and quotes fabrication and installation.

  3. 3

    Fabrication

    Steel is cut, welded, drilled and finished from BHD's own stock.

  4. 4

    Installation

    The structure is fixed on site and handed over ready for roofing, cladding or use.

Recent work

Projects by BHD

All projects
Steel Horizon Project

Steel Horizon Project

Materials we use

From BHD's own stock

Every material is also sold on its own if you have your own installer.

SQUARE HOLLOW SECTION (SHS)
Steel Products

SQUARE HOLLOW SECTION (SHS)

SQUARE HOLLOW SECTION (SHS) — Square Hollow Section (SHS) is a welded square steel tube used for structural columns, beams, trusses, fencing, and fabricated frames. In Kenya, SHS is the preferred structural member for gates, car ports, verandas, warehouse columns, and light commercial buildings where strength and clean aesthetics are required.

RECTANGULAR HOLLOW SECTION (RHS)
Steel Products

RECTANGULAR HOLLOW SECTION (RHS)

RECTANGULAR HOLLOW SECTION (RHS) — Rectangular Hollow Section (RHS) is a welded rectangular steel tube used for structural beams, columns, window frames, and architectural fabrications. In Kenya, RHS is specified for applications where unequal strength in two directions is required — such as beams in bending and wide-span frames.

HR Beams
Steel Products

HR Beams

HR Beams — HR Beams are hot-rolled structural steel I-beams and H-beams used as primary load-bearing members in commercial, industrial, and infrastructure construction. In Kenya they are the backbone of multi-storey buildings, warehouses, factories, and bridges — delivering maximum strength-to-weight efficiency for spanning and column applications.

HR Channel
Steel Products

HR Channel

HR Channel — HR Channel is a hot-rolled structural steel section with a U or C-shaped profile used for beams, columns, bracing, and industrial fabrication. In Kenya, HR Channel is specified for warehouse framing, industrial plant support, vehicle chassis, and fabricated structural connections where flanged support is required.

MS ANGLE
Steel Products

MS ANGLE

MS ANGLE — MS Angle (angle iron) is an L-shaped mild steel profile used for frames, brackets, supports, towers, and structural reinforcement. In Kenya it is one of the most widely specified structural members for gate frames, window grills, bed frames, tower legs, and general fabrication across every sector.

MS Flat Bars
Steel Products

MS Flat Bars

MS Flat Bars — MS Flat Bars are rectangular-cross-section mild steel bars used for fabrication, framing, and general metalwork. In Kenya they are a universal workshop consumable — essential for gate frames, window grills, bracket fabrication, stiffener strips, and virtually every kind of light steel fabrication.

MS Plates
Steel Products

MS Plates

MS PLATES — MS Plates are hot-rolled mild steel plates supplied in thicknesses from 3mm to 25mm+ for structural, fabrication, and industrial applications. In Kenya they are the core raw material for trailer bodies, fabricated tanks, gussets, machine bases, base plates, and heavy-duty structural fabrication.

ZED PURLINS
Steel Products

ZED PURLINS

ZED PURLINS — Zed Purlins are cold-formed Z-shaped galvanised steel sections used as secondary roof and wall framing. In Kenya they are the structural backbone supporting roof cladding on warehouses, factories, commercial buildings, and agricultural structures where spans, strength, and fast installation matter.

FAQs

Steel Fabrication and Installation: common questions

Guides

Read before you build

Doing it yourself? Start with the Steel vs timber roof trusses (guide).

Get a quote for steel Fabrication and Installation

Send drawings, photos or a cutting list on WhatsApp. Monday to Friday 8am–5pm, Saturday 8am–1pm.

Trusted Partners

Brands We Work With

brand1-1
brand6-1-300x174
brand7-1-300x92
brand8-1-300x168
brand9-1-300x300
brand1-1
brand6-1-300x174
brand7-1-300x92
brand8-1-300x168
brand9-1-300x300